XPedite7172

The XPedite7172 is a high-performance, low-power 3U VPX-REDI single board computer based on the Intel Core 2 Duo processor. With two x4 PCI Express P1 interconnects and two Gigabit Ethernet ports, the XPedite7172 is ideal for high-bandwidth data-processing applications.

The XPedite7172 accommodates up to 4 GB of DDR2 ECC SDRAM to support memory-intensive applications and hosts numerous I/O ports including Gigabit Ethernet, USB 2.0, SATA, and RS-232/RS-422/RS-485 through the P2 backplane connector.

The XPedite7172 can be used in either the system slot or peripheral slot of a VPX backplane. Linux, Wind River VxWorks, QNX Neutrino, and Green Hills INTEGRITY Board Support Packages (BSPs), as well as Windows drivers, are available.

• Intel® Core™2 Duo processor at up to 1.8 GHz
• 3U VPX module
• OpenVPX standards based
• Ruggedized Enhanced Design Implementation (REDI)
• Conduction or air cooling
• Up to 4 GB of DDR2-400 ECC SDRAM
• Up to 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash
• XMC interface with rear and front panel I/O support
• Two x4 PCI Express P1 fabric interconnects
• Two SerDes Gigabit Ethernet or 10/100/1000BASE-T Ethernet ports
• Two optional rear panel USB 2.0 high-speed ports
• Six optional rear panel SATA ports
• Two rear panel RS-232/RS-422/RS-485 serial ports
• Front I/O available via plugover module
• Linux BSP
• VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Microsoft Windows drivers

Click on the image above to view a larger version.

Processor

• Intel Core 2 Duo at up to 1.8 GHz
• Up to 200-MHz (800 MT/s) FSB
• Up to 6 MB of L2 cache

Memory

• Up to 4 GB of DDR2-400 ECC SDRAM
• Up to 2 MB firmware hub flash (or 1 MB with redundancy)
• 4 GB of NAND flash

VPX (VITA 46) P1 I/O

• x4 PCI Express interface to P1.A
• x4 PCI Express interface to P1.B
• Two SerDes Gigabit Ethernet ports (or one 10/100/1000BASE-T port out P1 and one out P2)
• X12d XMC P16 I/O

VPX (VITA 46) P2 I/O

• One 10/100/1000-Mbps Gigabit Ethernet port (optional)
• Six SATA ports (optional)
• Two USB 2.0 ports (optional)
• Two RS-232/RS-422/RS-485 serial ports
• I²C port
• 3.3V GPIO signals
• P64s P14 I/O

XMC Site

• x4 PCIe port
• P64s P14 I/O support
• X12d P16 I/O support

Front Panel I/O

• Front panel RJ-45 Ethernet, USB, and micro DB9 RS-232 serial ports available via optional plugover module

Software

• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP
• Windows drivers

Physical Characteristics

• 3U VPX-REDI conduction- or air-cooled form factor
• Dimensions: 100 mm x 160 mm
• 0.8 in. pitch without solder side cover
• 0.85 and 1.0 in. pitch with solder side cover

Environmental Requirements

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• Maximum power consumption: 37 W (with 1.8-GHz processor), 28 W (with 1.2-GHz processor)

Accessories

• XTend202 (90070170) - Debug Module with LPC Cable