XPedite6032

Freescale MPC7447A/7448 Processor-Based Conduction- or Air-Cooled 3U cPCI Module

The XPedite6032 is a high-performance conduction- or air-cooled 3U CompactPCI (cPCI) module that dissipates less than 18 W and is capable of operating at up to 85°C at the external thermal interface without forced air flow (conduction-cooled version) or up to 55°C ambient air temperature with 300 LFM airflow (air-cooled version). The XPedite6032 can also host one single-width conduction-cooled PMC or standard air-cooled PMC. The XPedite6032 is tolerant of 40 g peak/6 ms half sine shock, random vibration of 0.1 g²/Hz from 50 to 2000 Hz, and swept sinusoidal vibration of 0.06 inch/10 g peak amplitude from 10 to 500 Hz.

The XPedite6032 utilizes the Freescale MPC7447A/7448 embedded processor and Marvell Discovery III system controller and provides up to 512 MB DDR-266 SDRAM, up to 128MB of NOR flash, two RS-232/RS-422 serial ports, a 33/66 MHz cPCI interface and 66/100/133MHz PCI-X PMC interface. The serial and two Gigabit Ethernet interfaces are accessible through the backplane J2 connector along with a subset of the PMC's P14 I/O. The XPedite6032 can be built as a system or peripheral cPCI module.

The XPedite6032 is ideal for 3U cPCI applications in commercial or extended temperature, shock, and vibration environments that require high bandwidth and processing performance.

  • Freescale MPC7447A/7448 processor
  • Conduction- or air-cooled 3U cPCI Card
  • One conduction- or air-cooled PCI-X PMC slot
  • Extended shock/vibration tolerance
  • Up to 512 MB DDR-266 SDRAM
  • 128 MB soldered flash
  • Two rear I/O Gigabit Ethernet interfaces
  • Two RS-232/RS-422 serial ports
  • PMC P14 backplane I/O
  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • LynxOS BSP
XPedite6032 Block Diagram

Click on the image above to view a larger version.

Processor

  • Freescale MPC7447A/7448
  • 1 GHz max processor speed
  • 133 MHz bus speed
  • 32 kB L1 instruction/data caches
  • 512 kB (7447A) / 1 MB (7448) L2 cache

Conduction Cooled

  • Operates at up to 85°C at the external thermal interface

Air Cooled

  • Operates at up to 55°C ambient air temperature with 300 LFM airflow

PCI-X PMC Slot

  • Maximum aggregate bandwidth of 1 GB
  • Processor PMC (PrPMC) support

Non-Volatile Storage

  • Up to 128 MB NOR flash
  • 4 kB SEEPROM
  • 128 kB NVSRAM

Ethernet

  • Two Gigabit Ethernet ports
  • Rear I/O

DDR SDRAM

  • Up to 512 MB at DDR-266
  • 2.6 Gbps peak bandwidth

Rear I/O

  • Two Gigabit Ethernet ports
  • Two RS-232/RS-422 serial ports
  • Four GPIO pins
  • One I²C port

Software

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
  • LynxOS BSP

Physical Characteristics

  • 3U cPCI form factor
  • Dimensions: 100 mm x 160 mm

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
  • Conformal coating available as an ordering option

Power Requirements (Estimate)

  • 3.3V, 5.2 A, 17.16 W
  • 5V, 0.05 A, 0.25 W

Accessories

  • XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable

Additional Information