XPedite1002

The XPedite1002 is a high-performance, conduction-cooled Processor PMC Module (PrPMC) that dissipates less than 7.5 W and is capable of operating at up to 85°C without faceplate I/O. The XPedite1002 is tolerant of extended shock, up to 40 g peak sawtooth for 11 ms, and vibration of 0.1 g²/Hz from 5 to 2000 Hz. A PCI-X PMC interface provides the system designer with ample bandwidth for I/O intensive applications. Two rear panel Ethernet ports provide a flexible I/O interface by auto-negotiating between 10, 100, and 1000 Mbps operation. Ample flash for flash file systems is provided via NAND flash.

The XPedite1002 utilizes the low-power Applied Micro PowerPC 440GX embedded processor. With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the 440GX offers a highly optimized solution for packet processing and general computing applications. The serial and Gigabit Ethernet interfaces are accessible through P14 I/O.

The XPedite1002 is ideal for PrPMC applications in extended temperature, shock, and vibration environments that require high bandwidth and processing performance. The 440GX processor dissipates only 3 W while operating at 667 Mhz and provides 1334 DMIPs of processing power.

• Applied Micro PowerPC 440GX 533-800 MHz processor
• Conduction-cooled mezzanine card without faceplate I/O
• Extended shock and vibration tolerance
• 133-MHz PCI-X PrPMC and local bus interfaces
• Up to 256 MB DDR-333 SDRAM
• Up to 128 MB NOR flash
• Up to 2 GB NAND flash
• Two Gigabit Ethernet ports
• Two RS-232 serial ports
• Rear I/O
• Integrated 256 kB SRAM or L2 cache
• Linux BSP
• Wind River VxWorks BSP

Click on the image above to view a larger version.

Processor

• Applied Micro PowerPC 440GX
• 800 MHz max processor speed
• 133 MHz PCI-X interface
• 32 kB L1 instruction/data caches
• 256 kB L2 cache/SRAM
• DDR-333 SDRAM interface
• Two Gigabit Ethernet controllers
• Two serial controllers
• Two I²C controllers

Conduction Cooled

• Dissipates less than 7.5 W
• Operates at up to 85°C without faceplate I/O

Non-Volatile Storage

• Up to 128 MB NOR flash
• Up to 2 GB NAND flash
• 2 kB SEEPROM

Ethernet

• Auto-negotiates between 10/100/1000 Mbps
• Rear I/O

DDR SDRAM

• Up to 256 MB at up to 333 MHz
• 2.6 Gbps peak bandwidth

Rear I/O

• Two Gigabit Ethernet ports
• One fast Ethernet port
• Two RS-232 serial ports
• One I²C port

Software Support

• Linux BSP
• Wind River VxWorks BSP
• LynxOS BSP

Physical Characteristics

• PMC form factor
• Dimensions: 143.75 mm x 74 mm
• 10 mm stacking height

Environmental Requirements

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 5
• Conformal coating available as an ordering option

Power Requirements (Estimate)

• 3.3V, 2.27 A, 7.5 W

Accessories

• XTend200 (90070050) - Debug Module with JTAG/Serial/Ethernet Cable