XIt1000

6U cPCI I/O Transition Module For X-ES Products

The XIt1000 is a 6U cPCI transition module that supports rear I/O for several products in X-ES's product line.

The XIt1000 supports both IDE and SCSI bulk storage interfaces. The XPort6000 SCSI card is supported via a 68-pin SCSI connector. The module also supports the XCalibur and XChange series IDE interface through 40-pin, 44-pin, and CompactFlash headers.

The transition module also breaks out PICMG 2.16 Gigabit Ethernet ports via RJ-45 connectors. Additionally, rear I/O Ethernet ports for the XPedite and XPort series of cards are also accessible. The XIt1000 also breaks out the RS-232/RS-422 serial ports and E1/T1/J1 ports for the XChange, XPort, and XPedite series of modules.

The XIt1000 is available in multiple configurations. Not all connectors are placed on all configurations. Contact X-ES for an appropriate configuration based on your specific I/O needs.

  • 6U cPCI Rear Transition Module
  • Supports breakout of two PICMG 2.16 Gigabit Ethernet ports
  • 40-pin IDE connector
  • 44-pin laptop IDE connector
  • 68-pin SCSI connector
  • Two RS-232/RS-422 RJ-45 connectors
  • Four E1/T1/J1 RJ-45 connectors
  • One CompactFlash connector
XIt1000 Block Diagram

Click on the image above to view a larger version.

6U SBC I/O Support

  • Integrated IDE via standard 40-pin header or laptop drive 44-pin header
  • Two 2.16 Gigabit Ethernet ports via RJ-45 connectors
  • Two RS-232/RS-422 serial ports via RJ-45 connectors

PMC I/O Support

  • 68-pin SCSI connector
  • One RS-232 serial port
  • Two Gigabit Ethernet ports via RJ-45 connectors
  • Four T1/E1/J1 ports

Physical Characteristics

  • Dimensions: 233.35 mm x 85.5 mm

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Additional Information