XChange3010

The XChange3010 is a 3U conduction- or air-cooled VPX-REDI module that provides a means of bridging from a serial PCI Express VPX fabric and parallel 32-bit PCI bus. This allows a system designer to migrate to VPX processor cards or other modern VPX devices without forcing the redesign of existing CompactPCI peripheral cards.

The PCI Express switch may be configured so that any one of the four VPX ports, the XMC site, or the PCI bus is the root complex.

• 3U VPX switch
• Ruggedized Enhanced Design Implementation (REDI)
• Conduction or air cooling
• Four VPX x4 PCI-Express
• Supports three cPCI peripheral cards when used with the XTend4010
• Supports four cPCI peripheral cards if appropriate backplane is used and no PrPMC is placed
• Any XMC/PrPMC card may be used as a system controller
• Supports 5V/3.3V PCI VIO power

Click on the image above to view a larger version.

VPX

• Provides the switch for a star PCI Express fabric

cPCI

• Supports three CompactPCI peripheral slots when used on the XTend4010
• Supports four CompactPCI peripheral slots if no PrPMC is placed and is used with the appropriate backplane
• 32-bit wide PCI bus
• 33/66-MHz frequency operation

Ethernet

• Two 10/100-Mbps Ethernet lanes may be routed from either the XMC or the PMC site

Serial

• Serial I/O may be routed to either the XMC or the PMC site

Physical Characteristics

• 3U cPCI form factor
• Dimensions: 100 mm x 160 mm
• 10 mm stacking height

Environmental Requirements

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• 3.3V, 0.6 A, 2 W
• 5V, 1.24 A, 6.2 W