Extreme Engineering Solutions: XChange1104

Dual PrPMC cPCI Carrier Card with AMCC PowerPC 440GX and PICMG 2.16

Features

AMCC PowerPC 440GX 533-800 MHz Processor
100-MHz PCI-X CompactPCI and Local Bus Interfaces
Autosense System / Peripheral Slot
Hot Swap Support
Up to 1 GB 333-MHz DDR SDRAM
16-192 MB Soldered Flash
512 KB Socketed Flash
Up to 1 GB CompactFlash
Two Front Panel Gigabit Ethernet Ports and Serial Port
Two Gigabit PICMG 2.16 Backplane Ethernet Ports
Complies with PICMG 2.0, 2.1, 2.3, 2.9, 2.16
VxWorks Driver and BSP
Linux LSP
IPMI

Typical Applications

LAN/WAN Networking
Telecommunications Management Network
Data and Process Control

Description

The XChange1104 is a versatile 6U CompactPCI dual PrPMC carrier card with a PICMG 2.16 Gigabit Ethernet backplane interface. With PCI-X support on both CompactPCI and local bus interfaces, the XChange1104 is ideal for applications requiring high bandwidth and the flexibility that PMC modules offer.

Based on the AMCC PowerPC 440GX Embedded Processor, the XChange1104 is armed with the processing power needed for demanding applications. With integrated PCI-X, DDR SDRAM, and Gigabit Ethernet interfaces, the 440GX offers a highly optimized yet cost-effective solution for packet processing and general computing applications.

Hot Swap support allows the XChange1104 to be installed into a live system without disrupting CompactPCI bus activity. In addition, system management bus support allows the card to be powered down and reset remotely through the IPMI interface.

Processor

AMCC PowerPC 440GX
533-800 MHz Processor Speed
100-MHz PCI-X Interface
32 KB L1 Instruction/Data Caches
256 KB L2 Cache/SRAM
333-MHz DDR SDRAM Interface
Two 10/100/1000-Mbps Ethernet Controllers

Memory

Up to 1 GB DDR SDRAM
16-144 MB Surface Mount Flash
512 KB Socketed Flash
Up to 1 GB CompactFlash
512 Byte Serial EEPROM

PICMG 2.1

Hot Swap support allows insertion and removal from an active CompactPCI bus

PICMG 2.3

Routes PMC I/O to P3 and P5

PICMG 2.9

Dedicated IPMI Microcontroller
Ability to control power and reset to the PMC slots
Monitors 1.2V, 1.25V, 1.5V, 2.5V, 3.3V, 5V
Monitors Board Temperature

PICMG 2.16

Auto negotiates between 10/100/1000 Mbps

PCI-X PMC Slots

Maximum Aggregate Bandwidth of 1 GB/s
PrPMC (Processor PMC) Support
10 mm Stacking Height

Software

VxWorks Driver and BSP
Linux LSP
Ethernet and IPMI Drivers

Front Panel

Serial Interface
Two 10/100/1000 Ethernet Ports

Physical

6U CompactPCI Form Factor
233.35 mm x 160 mm
Board Weight: 13.5 oz

Power Requirements (*)

+3.3V 3.48A 11.5W
+5.0V 0.1A 0.5W
+12.0V 0.00A 0.0W
-12.0V 0.00A 0.0W

Operating Temperature

0 to +55º C ambient

Humidity

0% to 85%

Storage Temperature

-40 to +85º C

Test Configuration*

CPU at 667 MHz, DDR at 333 MHz, all interfaces active.

Phone: 608-833-1155
Fax: 608-827-6171
Web: http://xes-inc.com
Email: sales@xes-inc.com