Extreme Engineering Solutions: XChange1100

Dual PPMC cPCI Carrier Card With AMCC PowerPC 440GX Processor and PICMG 2.16 Switched Ethernet

Features

AMCC PowerPC 440GX 533-800MHz Processor
133MHz PCI-X CompactPCI and Local Bus Interfaces
Autosense System / Peripheral Slot
Hot Swap Support
Up to 512MB SO-DIMM 333MHz DDR SDRAM
16-144MB Soldered Flash
512KB Socketed Flash
Up to 1GB CompactFlash
Two Front Panel 10/100/1000Mbps Ethernet and One Front Panel Serial Port
Two 10/100/1000Mbps PICMG 2.16 Backplane Ethernet Ports
Complies with PICMG 2.0, 2.1, 2.3, 2.9, 2.16
VxWorks BSP
Linux LSP

Typical Applications

LAN/WAN Networking
Telecommunication Management Network
Data and Process Control

Description

XChange1100 is a versatile 6U CompactPCI dual PrPMC carrier card with a PICMG 2.16 Gigabit Ethernet backplane interface. With PCI-X support on both CompactPCI and local bus interfaces, XChange is ideal for applications requiring high bandwidth and the flexibility that PMC modules offer.

Based on the AMCC PowerPC 440GX Embedded Processor, XChange1100 is armed with the processing power needed for demanding applications. With integrated PCI-X, DDR SDRAM, and Ethernet interfaces, the 440GX offers a highly optimized yet cost effective solution for packet processing and general computing. The serial and ethernet interfaces are accessible through the front panel. The SO-DIMM DDR SDRAM memory slot allows memory upgrades to be done in the field.

Hot Swap support allows XChange1100 to be installed into a live system without disrupting CompactPCI bus activity. In addition, system management bus support allows the card to be powered down and reset remotely through the IPMI interface.

Processor

AMCC PowerPC 440GX
533-800MHz Processor Speed
133MHz PCI-X Interface
32K L1 Instruction/Data Caches
256KB L2 Cache/SRAM
333MHz DDR SDRAM Interface
Two 10/100/1000Mbps Ethernet Controllers

Memory

DDR SO-DIMM SDRAM Slot
16-144MB Surface Mount Flash
512KB Socketed Flash
Up to 1GB CompactFlash
512 Byte Serial EEPROM

PICMG 2.1

Hot Swap support allows insertion and removal from an active CompactPCI bus

PICMG 2.3

Routes PMC I/O to P3 and P5

PICMG 2.9

Dedicated IPMI Microcontroller
Ability to control power and reset to the PMC slots
Monitors 1.5V, 1.8V, 2.5V, 3.3V, 5V, +12V, -12V
Monitors Board Temperature

PICMG 2.16

Auto negotiates between 10/100/1000Mbps
High Bandwidth PCI-X Controller

PCI-X PMC Slots

Maximum Aggregate Bandwidth of 1GBps
PrPMC (Processor PMC) Support
10 mm PMC stacking height

Software

VxWorks BSP
Linux LSP
Ethernet and IPMI Drivers

Front Panel

Serial Interface
Two 10/100/1000 Ethernet Ports

Physical

6U CompactPCI Form Factor
233.35mm x 160mm
Board Weight: 13.6 oz.

Power Requirements (@667MHz)

+3.3V 3.94A 13.0W
+5.0V 0.05A 0.25W
+12.0V 0.00A 0.0W
-12.0V 0.00A 0.0W

Operating Temperature

0 to +55C ambient, at board

Humidity

0% to 85%

Storage Temperature

-40 to +70C

Phone: 608-833-1155
Fax: 608-827-6171
Web: http://xes-inc.com
Email: sales@xes-inc.com