XCalibur1301

The XCalibur1301 is a high-performance 6U CompactPCI single board, multiprocessing, computer that is ideal for ruggedized systems requiring high-bandwidth processing and low power consumption. With dual PowerPC e600 cores running at up to 1.25 GHz, the MPC8640D delivers enhanced performance with AltiVec technology and IEEE 754 dual-precision floating point and offers efficiency for today's network information processing and other embedded computing applications.

The XCalibur1301 provides two separate channels of up to 4 GB (2 GB each) DDR2-533 ECC SDRAM, two PrPMC/XMC slots, as well as 256 MB of NOR flash (with redundancy). The XCalibur1301 also supports four Gigabit Ethernet ports, I²C, PMC I/O, XMC I/O, and RS-232/RS-422/RS-485 serial ports out the front panel or J5 connector.

The XCalibur1301 is a powerful, feature-rich solution for the next generation of compute intensive embedded applications. Operating system support for Wind River VxWorks, Green Hills INTEGRITY, QNX Neutrino, and Linux are available.

• Freescale MPC8640D processor with dual PowerPC e600 cores at up to 1.25 GHz
• 6U cPCI module
• Conduction or air cooling
• Two channels of up to DDR2-533 SDRAM per processor, up to 4 GB (2 GB each)
• Double-precision FPU
• Integrated AltiVec Unit
• Up to 256 MB of NOR flash (with redundancy)
• Up to 8 GB of NAND flash
• Four Gigabit Ethernet ports
• x8 PCI Express to XMC sites
• Two SATA 3.0 ports to J5
• Three USB 2.0 ports (one configurable to front panel and two to J5)
• Two RS-232/RS-422/RS-485 serial ports
• Two PrPMC/XMC interfaces
• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Green Hills INTEGRITY BSP

Click on the image above to view a larger version.

Processor

• Freescale MPC8640D processor
• Two PowerPC e600 cores at up to 1.25 GHz
• 1 MB of L2 cache per core
• Integrated AltiVec
• IEEE 754 floating point unit

Memory

• Two channels of DDR2 ECC SDRAM, up to 4 GB (2 GB each)
• Up to 8 GB of NAND flash
• Up to 256 MB of NOR flash (with redundancy)
• 16 kB I²C SEEPROM

cPCI

• 66 MHz, 64-bit PCI interface to J1 and J2
• PICMG 2.1 (Hot swap support)
• PICMG 2.3 (PMC I/O to J3 and J5)
• PICMG 2.9 (Dedicated IPMI controller)
• PICMG 2.16 (Two 10/100/1000 Base-T Ethernet ports)

Front Panel

• Two RS-232 serial ports
• One or two Gigabit Ethernet ports
• USB 2.0 port
• General purpose LEDs

Back Panel

• Two RS-232/RS-485 serial ports
• Two PICMG 2.16 Gigabit Ethernet ports
• Two SATA ports
• PMC I/O
• Two USB 2.0 ports

Software Support

• Linux BSP
• Wind River VxWorks BSP
• QNX Neutrino BSP
• Greens Hills INTEGRITY BSP

Environmental Requirements

• Supported ruggedization levels (see the X-ES Ruggedization Chart): 1, 3, 5
• Conformal coating available as an ordering option

Power Requirements

• 40 W (est.) per board

Accessories

• XTend300 (90070180) - 1x Female DB-9 to 2x Male DB-9 Serial Port Converter
• Cable (90000075) - Serial, Micro D to DB-9, F to M, 3 ft.