XCalibur1200

Single/Dual Freescale MPC7447A/7448 Processor-Based Air-Cooled 6U cPCI Module with PICMG 2.16 Ethernet

The XCalibur1200 is a 6U CompactPCI single-board computer with a PICMG 2.16 Gigabit Ethernet backplane interface and dual Freescale MPC7447A/7448 1.4 GHz processors. It is well-suited for telecom, industrial, and general computing applications.

The XCalibur1200 provides a highly-configurable processing platform. Two SO-DIMM DDR SDRAM sockets provide up to 1 GB of local memory. An optional CompactFlash interface accepts up to 1 GB of non-volatile memory. Two PCI-X PrPMC slots are available for high bandwidth I/O.

Hot swap support allows the XCalibur1200 to be installed into a live system without disrupting CompactPCI bus activity. In addition, system management bus support allows the card to be powered down and reset remotely through the IPMI interface.

For the system designer, the XCalibur1200 provides a feature-rich solution to support the next generation of embedded applications.

  • Single/dual Freescale MPC7447A/7448 PowerPC 1.4 GHz processors
  • Dual PCI-X PrPMC slots
  • Autosense system/peripheral slot
  • How swap support
  • Up to 1 GB DDR SDRAM
  • Up to 128 MB soldered flash
  • Three front panel Gigabit Ethernet ports
  • Complies to PICMG 2.0, 2.1, 2.3, 2.9, and 2.16
  • VxWorks BSP
  • Linux BSP
  • QNX Neutrino BSP
  • Green Hills INTEGRITY BSP
XCalibur1200 Block Diagram

Click on the image above to view a larger version.

Processor

  • Single/dual Freescale PowerPC MPC7447A/7448 processors
  • 1.4 GHz max processor speed
  • 133 MHz bus speed
  • 32 kB L1 instruction/data caches
  • Up to 1 MB L2 cache

Memory

  • Dual DDR SO-DIMM SDRAM
  • Up to 144 MB soldered NOR flash
  • 512 KB socketed NOR flash
  • 512 byte SEEPROM

cPCI

  • Operates in system or peripheral slot (jumper selectable)
  • PICMG 2.1 (hot swap support)
  • PICMG 2.3 (routes PMC I/O to P3 and P5)
  • PICMG 2.9 (dedicated IPMI controller)
  • PICMG 2.16 (two 10/100/1000 BASE-T Ethernet ports)

PCI-X PMC Slots

  • Maximum aggregate bandwidth of 1 Gbps
  • Processor PMC (PrPMC) support

Software Support

  • Linux BSP
  • Wind River VxWorks BSP
  • QNX Neutrino BSP
  • Greens Hills INTEGRITY BSP
  • Ethernet and IPMI drivers

Environmental Requirements

  • Supported ruggedization levels (see the X-ES Ruggedization Chart): 1
  • Conformal coating available as an ordering option

Power Requirements

  • 3.3V, 3.8 A, 12.54 W
  • 5V, 1.95 A, 9.75 W

Accessories

  • Adapter (90000050) - Serial, RJ-45 to DB-9
  • Memory (9000010x) - CompactFlash Modules
  • Memory (9000100x) - DDR SDRAM SO-DIMM Modules

Additional Information

Related Products